Common Rail Injector Test Bench EPS207 Injector Tester
Product DescriptionThe product is able to detect Bosch, electronics, Delphi, Siemens, Carter and other brands of electronic fuel injectors, using frequency conversion speed control, industrial computer control, special software as the core, touch screen operation, can complete the entire test of the......
Send Inquiry
Product Description
The product is able to detect Bosch, electronics, Delphi, Siemens, Carter and other brands of electronic fuel injectors, using frequency conversion speed control, industrial computer control, special software as the core, touch screen operation, can complete the entire test of the injector.
Functions and characteristics:
*The test is comprehensive. It can test the fuel injection volume of all injectors, such as full load, medium speed, idle speed and pre injection.
*Wide range of uses. It can detect BOSCH, Denso, Delphi, SIEMENS, Carter and other injectors.
*Automatically test various solenoid valve injector and Piezo injector
The noise of the whole machine is low. Main engine adopts frequency conversion speed regulation, speed precast, low noise and no impact.
*Control advanced. One key selection, whole process detection.
*There are more than 3000 kinds of standard parameters of injector.
*You can set the injection current curve, injection time and pressure by yourselves
*Open data management. Under the guidance of users, they can add their own injector fuel quantity, especially suitable for new injector standard fuel quantity calibration.
| 1 | original Bosch CP1 pump |
| 2 | Fuel temperature controller 40±2 ºC |
| 3 | Equip high Precision flow sensor and DRV |
| 4 | Equip original Bosch pressure sensor(0-2000bar) |
| 5 | Single servo motor |
| 6 | Power supply parameters:220 volt voltage |
| 7 | Main engine speed: 0---3000 RPM / min |
| 8 | injector maximum pressure: 2200Bar |
| 9 | Filter accuracy: less than 5 m |
| 10 | Fuel tank capacity: 15 liters. |
Nanyang Nantai Test Equipments Co.,Ltd is a joint-stock enterprise that produces common rail test bench, common rail injector test bench and diesel injection pump test benches and diesel parts to serve the automobile aftermarket all over the world.
Nanyang Nantai Test Equipments Co.,Ltd was established in 1998, and started to fight and create in mechanical pump test bench manufacturing factory. We using the purchasing, machining and sale as our major sales model and laid the foundation for the preliminary development of our company.
Q: ARE YOU TRADING COMPANY OR MANUFACTURER ?
A: We are test bench assembling factory. We have had test bench for 20 years.
Q: HOW LONG IS YOUR DELIVERY TIME?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: WHAT IS YOUR TERMS OF PAYMENT ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 40% T/T in advance ,balance before shippment.
Q: How about the use of maintenance technology and equipment ?
A:We have free training about test bench,injector and pump maintenance.
Q: Why should I choose your product?
A: We can provide you the best quality and the most competitive price ,and we have our own engineer, if you have any requirements you can contact us directly.
